Paving stones are often the visiting card of a garden, which is why you should clean the paving stones at least once a year. Here is a guide.Paving stones also need to be cleaned from time to time
Not only the lawn, the beds and the individual plants need a lot of care. All garden decorations, garden furniture and even garden paths must be taken care of. Garden paths or the pavement can get dirty very quickly and a lot of weeds spread in the small cracks between the stones. And that looks really ugly.
The only problem with the whole thing is that this is really not an easy job. After all, you have to prepare stone by stone or chink by chink and clean them and remove weeds. Nevertheless, this work must also be done so that the yard entrance or the entire garden looks neat.
If you go to work regularly and clean the paving stones, you will prevent from the outset that heavy soiling can form and the weeds can spread extremely. Moss and tufts of grass in the cracks, as well as unsightly stains on the paving stones have no chance.
The following step-by-step instructions should now show you how best to clean the paving stones, whether they are made of concrete or natural stone, and how to weed, e.g. It is best to remove moss and tufts of grass from the cracks.
Cleaning paving stones - step by step instructions
Step 1 - remove moss and weeds:
The first thing to do is to sweep the paving stones thoroughly and remove the moss and weeds from the cracks. To remove moss and weeds from the cracks in the paving stones, you can use a special tool, a so-called moss scraper or joint scraper (available from Amazon). Alternatively, you can also use a high-pressure cleaner to clean the stone cracks with a light moss covering. Chemical weed killers should only be used in exceptional cases.
Step 2 - surface cleaning:
Numerous weather influences and dirt leave unsightly marks on paving stones over time. Therefore, of course, you have to clean the surface of the paving stones from time to time.
»Clean concrete block:
It is best to use soda water for concrete blocks (soda is available in drugstores). You must spread this evenly with a broom or rubber puller on the top of the stone. If possible, the surface should be cleaned in good weather so that the soda-water mixture can work for at least 5 hours and the stones dry optimally. This is the only way to effectively clean it afterwards.
The soda-water mixture must not get into the eyes (risk of splashing), as this can lead to injuries.
»Clean natural stone:
If a paving stone is not a conventional concrete block, but a natural stone (such as granite, marble, limestone, etc.), you should of course use a special natural stone cleaner (e.g. available from Amazon) to clean the surfaces. When cleaning natural stones, water residues must never remain on the surface and after cleaning, you should always seal the surface again and again.
By the way, specialized companies also offer the treatment of natural stone paving that has become unsightly over time. As a rule, the areas worked on often look like new.
- MEM algae and green film remover
- Professional quality
- Contents: 5 ltr.
Step 3 - special stain removal:
Sometimes special stains also form on the paving stones, which then have to be removed explicitly. This includes bird droppings, which can usually be easily removed with hot water and a brush.
However, the removal of oil stains is somewhat more complex. If they are still fresh, you can bind them with sand (alternatively you can also use cat litter) and then remove them with a grease solvent. On the other hand, you must first liquefy older oil stains (e.g. with turpentine) before you can bind and remove the stains.
Alternatively, instead of a fat solvent, you can also dissolve a dishwasher tab in a little water. This also makes it easy to remove the oil stains.